Internal hard drive - 80 GB Hitachi HT541680J. I bought an iomega 160 GB eGo external USB-powered hard drive which is supposed to be pre-formatted and ready to go (plug-and-play). When I plug it in to a USB port the computer 'dings', the power light on the drive lights up and I can hear the drive running if I put it up to my ear. I just bought an Iomage Prestige Portable Hard Drive (Compact Edition, USB 2.0). I just took it out of the box and followed the instructions in the booklet that came with it. But my laptop isn't even recognizing that anything is plugged in??:sigh: I went on the support website and tried. If the external hard dive is a brand-new hard drive, and there is no partition on the drive, the system cannot recognized the drive size, which would cause the hard drive detected but not accessible. It is too old of your driver software. Video poker optimal strategy. You may find your external hard drive recognized in Device Manager, but not in Disk Management.
Abruptly unplugging an external USB hard drive without safely ejecting will easily cause serious problems, such as the external hard drive not recognized anymore or hard drive becomes inaccessible after unplugging. In this post, you can find the best solutions to solve the unreadable, unrecognized or inaccessible hard drive issues with detailed troubleshooting steps, and also the data recovery solution to export data from an external hard drive that you cannot access right now after unplugging.
Solution: Reformat the corrupted external hard drive
If Disk Management fails to fixexternal hard drivenot recognized afteraccidental unpluggingonWindows, the last choice is to reformat the corruptedexternal hard drive. But reformatting will clean all data stored on theexternal hard drive. Here recommend you the EaseUS hard drive recovery software.
This post offers help for people who unplugged an external hard drive but later find that the drive is no longer recognized or detected by Windows, or Windows can still read the hard drive but asks you to format the disk before you can use it.
| Workable Solutions | Step-by-step Troubleshooting |
|---|---|
| Fix 1. Temporarily show up |
|
| Fix 2. Recover data from hard drive | When the hard drive is showing up again on your computer, download EaseUS hard drive recovery software.Full steps |
| Fix 3. Permanently fix the problem | You can make changes in the Registry to make your external hard drive appear properly.Full steps |
Kite composer 1 9 3 download free. No matter which case could happen to you after inappropriately pulling a frequently used external hard drive out of the computer, it's not expected by us all. Usually, abruptly unplugging an external USB hard drive without safely ejecting will easily cause serious problems, such as the external hard drive not recognized anymore or hard drive becomes inaccessible after unplugging. On this page, you can find the best solutions to solve the unreadable, unrecognized or inaccessible hard drive issues with detailed troubleshooting steps, and also the data recovery solution to export data from an external hard drive that you cannot access right now after unplugging. Microsoft talk it download.
How to temporarily show up the external hard drive
It's because the upcoming two methods to make Windows detect your removable hard disk again is not 100% working for Windows recognizing the drive the next time you unplugged the drive and plug it again into the computer. You can take it as a temporary fix, for the purpose of extracting important data from there.
Method 1. Assign a drive letter to the drive
First of all, check if the drive is visible in the Disk Management or Device Manager.
To access the Disk Management: hit Start, in the run box, type diskmgmt.msc and hit Enter.
To access the Device Manager: hit Start, in the run box, type devmgmt.msc and hit Enter.
Good luck if the external hard drive is there. All you have to do to make it appear on your computer, follow the guide below.
Step 1. In the Disk Management, right-click the external hard drive (it shall be displayed as 'unallocated' state), and select 'Change Drive Letter and Paths' from the menu.
Step 2. Adobe acrobat reader version 8 or 9 is required. Choose a drive letter that has been not used for the current drive, such as E, F, G. and click OK to save the change.
Method 2. Update or reinstall drivers
Step 1. Open Device Manager > Expand Universal Serial USB controllers.
Step 2. Locate and right-click on the external drive and select Update Driver Software.
Step 3. Select Search automatically for updated driver software and Windows will help you update the latest drivers automatically.
How to recover data from the external hard drive
As soon as the hard drive is showing up again on your computer, go directly to download EaseUS hard drive recovery software to export data from the hard drive to another safe location. Since the hard drive may have developed bad sectors or some other hardware issues after accidentally unplugging, you're recommended to do data recovery instead of data backup at this moment.
Step 1. Choose the external hard drive
Since you're going to recover data from the external hard drive, run EaseUS Data Recovery Wizard and under the External Devices tab, choose the exact drive where you lost data. Click Scan.
Step 2. Scan for lost data
The software will start immediately to scan all over the selected drive for all lost data. During the scan, you could see more and more data showing up in the results.
Step 3. Preview and recover data
After the scan is over, check the scan results for the desired data. You can preview the file by double-clicking on it. Click Recover and choose another location to save the recovered data.
How to permanently fix the hard drive not recognized error after unplugging?
Welcome to the final part of troubleshooting an unrecognized external hard drive after unplugging due to improper removal from the computer. According to the feedbacks of people who were caught up in the same situation, by making changes in the Registry will help make your external hard drive appear properly on your computer and permanently solve the non-detection problem.
Step 1. Hit Start, type regedt32 and click OK.
Step 2. Backup your registry by going to file > export.
Step 3. On the left side, go to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E967-E325-11CE-BFC1-08002BE10318}.
Step 4. If you see any upper filter or lower filters at the right side, delete them.
People Also Ask
1. How to fix external hard drive not recognized after unplugging on Mac?
Chances are that frequently unplugging an external hard drive without properly ejecting will cause hard drive corruption, as a consequence, not recognized the next time you plugged it in the Mac. When a Mac drive isn't showing up as normal, try to change a connection cable or a USB port, and reboot your Mac for several times.
2. Why is my external hard drive not detected?
Most of the cases of an external hard drive being not detected by Windows, it's the fault of human errors or software/hardware corruption. When you cannot find the connected hard drive in Windows Explorer, try to verify if Disk Management can locate the hard drive and display it there. Disk utility not showing external drive. See how to fix external hard drive not detected.
3. Is it bad to unplug hard drive without ejecting?
Many people would argue that they didn't receive bad results as they always directly unplug a connected hard drive, USB flash drive or SD card from their computer. Surely, sometimes abruptly unplugging a drive without ejecting would not show some bad symptoms, but it's all about time. Jacks or better 96. The more frequently you did that improper thing, the more likely your hard drive will get corrupted and damaged in the future.
4. How do I format my hard drive that doesn't show up?
Usb Hard Drive Enclosure Not Recognized
To format a hard drive that is not showing up, you should try to locate the drive in Windows Disk Management.
- In Windows 10. go to This PC - Manage - Disk Management
- In Windows 7, go to My Computer - Manage - Disk Management
Right-click on the hard drive partition and choose Format., follow the format wizard to complete the formatting process.
I am running Mint 17.3 XFCE on my Samsung laptop. I have a couple of portable external hard drives (one Toshiba, one Iomega, both USB2 and each 320GB) more or less permanently plugged in. One has my music, the other my photos and archived documents. All works well.The problem I now have isn't, strictly, a 'Mint' problem, or even Linux related. It's about another hard drive.
As I was planning to do some backing up and other stuff, I have just plugged in another Iomega Prestige USB2 320GB portable drive - the same model and vintage as the one I have been using for ages. Brand new and unused, it has been sitting in its box since I bought it years ago.
The computer didn't 'recognise' it. The little light illuminated (showing it is getting power). But it didn't mount automatically (as other USB drives do as soon as they are plugged in). It doesn't show in the Thunar file manager. Nor does it show in the Disk Manager.
I tried it with a different USB lead (the one from my 'good' Iomega drive). No difference, and no joy.
So I tried plugging the drive into an old Windows XP laptop that I still use occasionally. Even worse. The power light illuminated OK. The computer initially said 'Found New Hardware' and then 'The device is ready for use'. But the drive didn't show up in 'My Computer'; nor when I looked via Properties>Hardware>Device Manager. I even tried to look for it using the Windows TweakUI tool, which normally lists all drives. Again, nothing. The worse problem was that the XP computer then froze, or hung, and I had a bit of a struggle to get it to shut down.
Iomega Portable Hard Drive Not Detected Connected
It's both puzzling and annoying, as this portable drive - although an old model - is brand new out of the box. Is it just a dead device? There's obviously no prospect of return or refund .. I actually think Iomega have ceased producing portable drives and may even have gone out of business. But is there any other way I can try to get this drive to function? I have no use for a paperweight!